Link to the website : Parker
The AC890 is a compact, modular system variable speed AC drive engineered to control speed and position of open-loop and closed-loop, single- or multi-motor AC induction or servo motor applications, up to 355 kW.
Brand: Parker
Drive shaft type :
Single-axis technology
Multi-axis technology
Input Voltage :
3*230VAC
3*380-480VAC
3*500-690VAC
320-705VDC ( CommonBus)
Compatible motor type :
Brushless servo
Frameless servo
Induction
Spindle
Torque
PMAC
Operating temperature : 0-45 °C for Frames B-F / derate up to max 50 °C
0-40 °C for Frames G-K / derate up to max 50 °C,
32-113F … Sizes B-F (derate up to max 122F)
32-104F … Sizes G-K (derating up to max 122F) °F
Modes of Control :
U/F
Sensorless Vector
Closed Loop Vector
Active Front End
Speed control of permanent magnet motor
Product type : AC drive
Product series : AC890
Output power : 0.55 – 1200 kW
Compatible feedback device : Resolver Incremental encoder
Communication interface : RS232 / RS485
CANopen
ControlNet
DeviceNet
Profibus
Profinet
Ethernet TCP/IP
Operating altitude: Up to 1000m ASL (derating >1000m)
Overload rating: Intensive duty (Constant torque): 150% for 60s
Normal service (Variable torque): 110% for 60s
Servo mode (Frames B-D): 200% for 4s
Servo Mode (Frames E-J): 150% for 60s
Specifications met :
CE (CEM & LVD)
UL listed
cUL listed
The AC890 is a compact and flexible variable speed systems AC drive achieving high performance and designed specifically for systems integration, saving you time and money. This modular system is engineered to control speed, torque and position of open-loop and closed-loop, single or multi-motor AC induction or PMAC motor applications. Compatible with a wide range of feedback options, the AC890 variable speed drive is compatible with any AC induction or PMAC motor and virtually any speed/position feedback option. Three option slots allow a wide range of communications and 1/0 modules to be easily added as required. DC or AC fed versions enable design flexibility, and conformal coating is available on most frame sizes. AC890 drives are available in 380-460/500V 3-phase 0.55 to 355kW and 220V-240V 3-phase 0.55 to 7.5kW.
Markets:
◦ Miscellaneous Industriall
◦ Primary Metal Refining/Process
◦ Rubber & Tire Processing
◦ Plastic Processing
◦ Food & Beverage
◦ Converting
◦ Web Transfer
◦ Factory Automation
◦ Test Rigs
◦ Miscellaneous Processing
◦ Ventilation
◦ Other HVAC
◦ Water
Features/Benefits:
• Open communications for protection of investment:
The AC890 has been deliberately designed to integrate seamlessly into your automation network.
To connect to your PLC or fieldbus network you can simply choose from the wide range of communication technology options.
◦ Ultra-fast control loops –
◦ Torque loop: 62.5us / – Speed loop: 62.5us / – Position loop : 62.5us
◦ Serves the most demanding applications:
Taking advantage of leading edge control algorithms running on a fast 150Mhz microprocessor, the AC890
drive can achieve very high-bandwidth control loops. This allows you to use the drive for the most demanding industrial applications e.g. printing, cut-to length, rotary shear, converting and slitting.
• Minimal delay between the fieldbus setpoints and the control loops :
Designed to integrate in existing automation systems, the AC890 features high performance ports linked directly to the fast control loops of the drive. Minimum delay exists between your digital setpoint sent through a fieldbus and the control loops.
Native Peer-Peer communications:
◦ Cascading of setpoints, feedbacks and control signals from drive to drive using IEEE1394 or Can communications from drive to drive, configured with the powerful and easy to use project based DSE890 programming software
◦ Replacement of analogue solutions:
Your existing analogue setpoint-based solutions can be replaced by a digital fieldbus-based solution with minimal bandwidth loss.
• Flexible feedback:
The AC890 offers system designers complete flexibility in their choice of feedback technology.
– Incremental encoder / – EnDat 2.1 (SinCos) encoder / – Resolver
The AC890 variable speed drives can be configured for 4 different modes of operation:
• Open-loop (volts / frequency) control
This mode is ideal for basic, single or multi-motor speed control.
Sensorless vector control
With its ultra high performance sensorless vector algorithm, the AC890 delivers a combination of both high torque and close speed regulation without the need for a speed measurement device.
• Closed-loop vector control
Full closed-loop flux vector performance can be achieved with the AC890 by simply adding an encoder feedback option card. This provides 100% continuous full load standstill torque, plus a highly dynamic speed loop more than sufficient for the most demanding applications.
• 4 Quadrant active front-end power supply module
With this configuration, the energy is fed back into the mains supply with sinusoidal currents and unity power factor; a very low current harmonic content is achieved (THD < 5%).
Applications:
◦ Extrusion
◦ Rolling mills
◦ Metal finishing
◦ Coating lines
◦ Forming rolls
◦ Fan & pump control
◦ Paper & pulp processing
◦ Printing
◦ Hoists and Winches
Technical Specifications:
One high performance level option for your needs:
Motion control with added position loop, motion control function blocks, move incremental, move absolute, move home, line drive master ramp and section control, winder blocks (speed winder, current winder), multiple full function PIDs, state machine, registration control and much more.
Automation and variable speed drives
Our skills and specialties